WEB Server - NGINX PHP 5.3 설치하기 - CentOS 7
WEB Server - NGINX PHP 5.3 설치하기 - CentOS 7
이번 포스팅에서는 PHP 5.2 버전 관리에 필요한 컴파일 설치에 대해서 알아보도록 하겠습니다
관련 글 :
WEB Server - NGINX Comfile 설치하기 - https://server-talk.tistory.com/301
WEB Server - NGINX PHP 연동하기 - CentOS 7 - https://server-talk.tistory.com/307
PHP 5.3 PHP-FPM 라이브러리 설치 |
1. 심볼릭 링크 설정
[root@php php]# ln -s /usr/lib64/libjpeg.so /usr/lib/ [root@php php]# ln -s /usr/lib64/libpng.so /usr/lib/
2. libmcrypt-2.5.8 설치
libmcrypt-2.5.8.tar.gz1) libmcrypt-2.5.8.tar.gz 압축해제
[root@nginx ~]# tar zxf libmcrypt-2.5.8.tar.gz
2) libmcrypt-2.5.8 소스 트리 구성
[root@nginx ~]# ./configure --prefix=/usr/local/
3) libmcrypt-2.5.8 설치 시작
[root@nginx ~]# make && make install
PHP 5.3 PHP-FPM 설치 |
PHP 5.3 버전 부터는 PHP-FPM을 지원하므로 따로 패치를 진행하지 않으셔도 됩니다.
1. PHP 5.3 압축해제 및 이동
[root@php ~]# tar zxf php-5.3.27.tar.gz [root@php ~]# cd php-5.3.27
2. PHP 5.3 소스트리
[root@php php-5.3.27]# ./configure --prefix=/usr/local/php53 \ --with-mysql=/usr/local/mariadb \ --with-mysqli=/usr/local/mariadb/bin/mysql_config \ --with-curl \ --disable-debug \ --enable-safe-mode \ --enable-sockets \ --enable-sysvsem=yes \ --enable-sysvshm=yes \ --enable-ftp \ --enable-magic-quotes \ --with-ttf \ --enable-gd-native-ttf \ --enable-inline-optimization \ --enable-bcmath \ --with-zlib \ --with-gd \ --with-gettext \ --with-jpeg-dir=/usr \ --with-png-dir=/usr/lib \ --with-freetype-dir=/usr \ --with-libxml-dir=/usr \ --enable-exif \ --enable-sigchild \ --enable-mbstring \ --enable-fastcgi \ --enable-fpm \ --enable-zip \ --with-openssl \ --enable-soap
3. PHP 5.3 컴파일 설치
[root@php php-5.3.27]# make && make install
4. php 설정파일 복사
[root@php php-5.3.27]# cp -a php.ini-development /usr/local/php53/lib/php.ini [root@php php-5.3.27]# cp -arp /usr/local/php53/etc/php-fpm.conf.default /usr/local/php53/etc/php-fpm.conf
5. PHP 5.3 구동파일 복사 및 권한설정
[root@php php-5.3.27]# cp -arp /usr/local/php53/sbin/php-fpm /etc/init.d/php-fpm53 [root@php php-5.3.27]# chmod 700 /etc/init.d/php-fpm53
6. PHP-FPM 구동 스크립트 생성
php-fpm53.txtvi /etc/init.d/php-fpm53
#! /bin/sh
### BEGIN INIT INFO
# Provides: php-5.3.27-fpm
# Required-Start: $all
# Required-Stop: $all
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: starts php-5.3.27-fpm
# Description: starts the PHP FastCGI Process Manager daemon
### END INIT INFO
php_fpm_BIN=/usr/local/php53/sbin/php-fpm
php_fpm_CONF=/usr/local/php53/etc/php-fpm.conf
php_fpm_PID=/usr/local/php53/var/run/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm "
$php_fpm_BIN $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Gracefully shutting down php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-exit"
exit 1
else
echo " done"
echo " done"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload}"
exit 1
;;
esac
7. PHP-FPM 실행
[root@php php-5.3.27]# /etc/init.d/php-fpm start
